The Remington 700 is an incredibly common bolt action rifle, mainly used for hunting and sniping. The gun is often used for long-range precision firing, requiring recoil and accuracy adjustments. A muzzle brake is used in this scenario.
We’ll go through the advantages of putting a muzzle brake on your Remington 700, as well as the features that make one perfect. We’ll even go through some of the better Remington 700 muzzle brakes on the market to assist you in making a decision.
What is a Muzzle Brake and How Does It Work?
A muzzle brake is a mechanism that is fixed on a rifle’s muzzle to control recoil and muzzle movement. Muzzle brakes divert the gases escaping the barrel in various directions, preventing the muzzle from rising or moving sideways.
The recoil of the firearm is significantly decreased as a consequence of the emitted weight of expanding gasses. The majority of muzzle brakes are considered to suppress pistol recoil by about 50%.
Due to the extreme recoil and anticipated precision over long ranges, muzzle brakes are widely used for heavy caliber rifles, such as the Remington 700. A muzzle brake is not to be mistaken with a flash hider (which masks muzzle glare) or a suppressor (which dampens noise).
Muzzle brakes also add weight to a firearm while increasing its volume. Many rifles would be difficult to fire if not having muzzle brakes.
What Are the Pros and Cons of Using a Muzzle Brake?
Using a muzzle brake has a number of advantages, particularly with a firearm like the Remington 700, which is a well-known sniping rifle.
The decrease of recoil is the most obvious advantage when using a muzzle brake. The pistol can not withstand the weight of constricted gas in the muzzle because the brake pushes the expanding gasses in various directions, which allows for considerable recoil reduction because the gasses also have more room and a shorter time to spread.
There is less shaking
Expanding gasses are often vented horizontally and upwards by a muzzle brake. This stops the muzzle from rising, as it does for all firearms. This substantial decrease in side-to-side and upward rotation aids in rapid shot realignment, which is extremely important when chasing game or sniping the objective.
As a consequence of the above advantages, a muzzle brake helps increase the rifle’s overall performance.
Recoil and muzzle movement are significantly reduced, allowing you to remain on track and fire more reliably. A muzzle brake makes a weapon more effective than one without one.
Since a muzzle brake adds a few inches to the length of the gun, it can be uncomfortable for you to use.
Rifles under 26 inches in length, on the other hand, are known as SBRs and are subject to NFA regulations. If required, a muzzle brake may be used to achieve that length.
What Characterizes a Brilliant Muzzle Brake?
We’ll look at some of the important features of a muzzle brake in this report.
Finish and Durability
Any product’s most basic virtue is its consistency and longevity. The overwhelming weight of gasses expanding out of the barrel must be tolerated by a strong muzzle brake. In no conditions can it warp or bend. As a result, the finish of a muzzle brake is critical to ensure that it is not harmed by weather, soil, moisture, or other agents.
The primary function of a muzzle brake is to reduce recoil. Different brakes have various features that reduce rebound to different degrees. A strong brake, on the other side, would minimize recoil by approximately 50%. All of the brakes on our chart are up to these standards.
Ease of Installation.
A muzzle brake should be simple to mount and should not necessitate any permanent gunsmithing or adjustments to your firearm (unless it has a non-threaded muzzle). Installing and removing brakes can be as easy as tightening a bolt.
There should be no Interference
A decent muzzle brake does not conflict with any of your rifle’s other attachments. Its profile should be slender and lightweight without losing efficiency.
Review: The Best Remington 700 Muzzle Brakes
We’ve hand-picked and collected a selection of the best Remington 700 muzzle brakes on the market based on the wanted characteristics of a muzzle brake.
Best Remington 700 Muzzle Brake: CARLSONS – REMINGTON TACTICAL BREECHER MUZZLE BRAKE
- High quality design
- Made by Remington
- Works with many 30 cal guns with fitting threads
- Holes designed for ideal gas expansion
- A bit pricey, but well worth it
On the first rank we have a Remington 700 muzzle brake that is made of plain stainless steel and has a silver coating.
This brake has a pattern of holes around the middle of its surface region to guide the spreading gases outwards, and it has a plain and basic configuration that was specifically developed for 700 Remington rifles. The muzzle brake is easy to fit over a 12-28 threaded muzzle.
This muzzle brake is the best option for you if you choose to get the highest quality brake available. This brake is clearly designed for incredibly delicate and accurate shooting applications, as for example hunting and shooting practice.
Remington made this muzzle brake, and it’ll work well for your 700 Remington rifle. It has a straightforward style and is suitable for both hunting and practice.
It’s worth noting that the price is very acceptable for this quality.
2nd Best Remington 700 Muzzle Brake: VAIS Muzzle Brake
- 20-30% Recoil reduction
- Adapts barrel profile
- Easy to install
- Quality material
- Hard to clean
Vais muzzle brakes are very common among 30 caliber rifle owners, perhaps because of their distinctive nature. This muzzle brake is made of chrome moly steel and has the same finish as the rest of the pistol.
The brake is robust and lightweight, so it won’t protrude too much and obstruct your motions. About half of the brake’s body is filled with a series of openings. These vents have been spaced properly to ensure a consistent gas flow pattern outside the muzzle.
The brake’s unusual configuration has attenuating holes that are both horizontal and perpendicular to the bore’s centerline, evenly dispersing sound and energy.
The Remington 700’s recoil is decreased greatly by the muzzle brake, by around 20-30%. The brake, also, keeps the rifle quieter.
The VAIS muzzle brake is compatible with a wide range of 30 caliber guns and is simple to mount. It also has a shape that is close to the barrel, so it does not protrude in any way.
VAIS has produced a high-quality commodity that offers excellent value for money. This brake is suitable for contests and hunting. The recoil of a 308 gun would be reduced to that of a 223.
3rd Best Remington 700 Muzzle Brake: Precision Armament – M11 Muzzle Brake
- Made by Remington
- Big holes for better gas expansion
- Simplistic design
- No protected finish
Precision Armament’s M11 muzzle brake is optimized for serious military applications. It has a large symmetrical blast baffle in the back, as well as compensated baffles up front.
Since the baffles are so wide, they steer a lot of gas outside, resulting in excellent recoil and jump reduction. The smaller the baffle diameter, the higher the ballistic coefficient and the less flight interference.
HTSR 400-series stainless steel bar, an incredibly robust and high-quality type of steel used for high-end applications, was precision machined into this brake. The brake’s strength-to-weight ratio has been improved, making it suitable for use with the Remington SPS tactical.
Because of its amazing characteristics, substantial recoil reduction, and low dust signature, the muzzle brake is an excellent match for the SPS. The brake performs admirably with the toughest loads a Remington 700 can accommodate. The brake, on the other hand, is rather noisy.
Because of its substantial recoil reduction, weight ration, and quality design, the 30 caliber muzzle brake is suitable for SPS tactical. Ideal for all rifle applications and compatible with a wide range of firearms.
- Good price
- Durable & Strong materials
- Flat design protects from intereference
- Bit noisey
This timber creek muzzle brake is a perfect choice for this list, because of it’s precision cut from high-grade stainless steel for reliability and power. It has a parkerized finish that prevents it from rain and soil, enabling it to last for years.
The brake is built for 308 caliber and can be conveniently installed on your Remington 700 with the help of a locking nut that comes with the box. It has 5/8-24 locking threads for mounting on your rifle’s muzzle end.
The brake has two holes on the top and a pair of vents on either foot. The side vents are wide enough to allow a considerable amount of gases to exit the brake, which tends to avoid side movement. The top holes keep the muzzle from rising and enable the brake to endure even the most severe recoil.
The muzzle brake is working with all firearms with a bore diameter of .30 caliber or greater.
It just weighs 5.5 lbs, so it won’t add anything to the weight of your weapon.
The Timber Creek Muzzle Brake decreases recoil dramatically and has an attractive design. The brake is made specifically for the Remington 700 rifle.
5th Best Remington 700 Muzzle Brake: Seekins Precision ATC Muzzle Brake
- Easy to install
- Modern design
- Using stainless steel
- Quite big length
Seekins Precision’s muzzle brake has an impeccable and sleek style with slightly different port patterns.
To find the best port layout for gasses to exit, it was planned using computational fluid dynamics simulation tools. This culminated in the development of this awesome piece of equipment for your Remington 700, which has a very low recoil.
The front of the muzzle brake has been ported, spreading gas pressure equally around the muzzle brake rather than only the first ports. The brake aids the gunman in achieving faster follow-up shots and is therefore simple to mount. The brake uses a knurled timing nut instead of a crush washer.
This eliminates the need to spend time aligning the nut each time you install it. Installation threads on the muzzle brake are 5/8-24, which is the most typical thread configuration for Remington 700 barrels.
To minimize hop and recoil, the Seekins Precision Muzzle Brake has an aesthetically appealing and intelligent build. The knurled timing nut makes installation easy, and the brake allows for fast follow-up shots. It’s ideal for shooting varmints.
When you shoot a round, a muzzle brake’s function is to minimize recoil and muzzle hop. A good muzzle brake reduces recoil and improves overall rifle accuracy, particularly at long ranges.
A decent muzzle brake should be long-lasting, simple to mount, and reduce recoil significantly. Remember that muzzle brakes, particularly this one, can be very noisy.
Common questions about Best 700 remington muzzle breaks
We’ve assembled a collection of the most commonly asked questions on using a muzzle brake for the Remington 700, as promised:
Will Muzzle Brakes Have an Effect on Velocity?
Not in the least. The length of the barrel determines the velocity of a projectile or bullet. When you have a muzzle brake, you’re only lengthening the barrel, which is still ported, and you’re not applying much weight to the projectile.
However, if the barrel is ported to mimic the properties of a muzzle brake, the velocity would be influenced. Just not with a muzzle brake, evidently.
What’s the Difference Between a Suppressor, a Muzzle Brake, and a Compensator?
These words are often misunderstood. The differentiation between them, on the other side, is very clear. To limit recoil, a muzzle brake has vents on the sides that propel the spreading gases sideways.
A compensator, on the other side, is designed to minimize muzzle hop by having vents on the upper part. The majority of muzzle brakes combine a brake and a compensator. A suppressor, on the other hand, resembles a plain cylinder (also known as a can) and reduces the weapon’s noise.
Is a Muzzle Brake deemed part of the barrel length?
Only after soldering, welding, or blind pinning has been used to securely mount it to the barrel. A muzzle mechanism that is not permanently fixed to a barrel is not included in the firearm’s length.
Because of the legal ramifications of pistol length, manufactures should not mount permanent muzzle systems on handguns they market.
Are Muzzle Brakes Successful in Improving Accuracy?
Yes, they are. Muzzle brakes are considered to increase the weapon’s overall accuracy. The decrease of recoil is the main cause for this.
A strong muzzle brake decreases the weapon’s recoil by about 50%, which has an effect on precision. Most brakes often monitor muzzle rise, allowing you to shoot subsequent shots with greater precision.
Can a Muzzle Brake Trigger My Scope to Break?
Could be. Most typical low-cost scopes are fragile and engineered to survive slow deceleration or recoil, while muzzle brakes result in a forceful deceleration of the weapon.
As a result, there’s a risk that a muzzle brake could damage your scope. There are, however, more durable scopes on the market that can withstand more pressure.
Are Muzzle Brakes Effective in Reducing Recoil?
It’s the same as wondering whether the sun supplies us with light. Muzzle brakes were created to minimize recoil in the first place. It’s for this purpose that they’re installed on a firearm. Some guns have such high recoil that firing them without a muzzle brake is almost impossible.
Anti-tank rifles, M82/M107, and howitzer cannons, for example. Depending on the design, a muzzle brake decreases recoil by 20-50 percent.
MUZZLE BRAKE or FIRE MUFFLER?
Muzzle dampers and muzzle brakes are two types of muzzle attachments that use gas from a fired cartridge differently. Basically, the two types differ in their funtkions and application:
Hot gas at the muzzle expands into the colder surrounding air. Photons are emitted from the heat – not from the burning powder. These photons are visible as a muzzle flash. A fire muzzle mixes the hot gases with the cooler ambient air, as it creates turbulence in the expansion of the hot gases. This mixing turns a bubble of hot gases into a shapeless shape with less surface area, visible as a flash.
A muzzle brake changes the direction of expansion of the hot gases at the muzzle upward or to the side, which reduces the rate of expansion. Further, the hot gases are propelled against a solid obstacle, creating a force in a desired direction. This force can be used to reduce recoil or upstroke. A good muzzle brake is enormously loud and the gases are thrown into the face of the shooter or the shooter next door.
What is a fire suppressor and what does it do?
A flash hider suppresses the muzzle flash in the visible spectrum of light. In the infrared range, the muzzle flash is still visible. The fact is that a flash suppressor only changes the signature in the visible range. Hot gases are hot gases and can be made visible with thermo-optical devices.
The statement that a muzzle flash is unburned powder can be forgotten. If not all powder is burned over the barrel length, then definitely the wrong powder was loaded. In certain pistol calibers, the powder is completely burned before the bullet leaves the case. In rifle cartridges, the powder is usually completely burned when the bullet has traveled about 75 – 125mm distance in the barrel.
Powder burns at very high temperatures and pressures. For rifle cartridges, these are around 2000°C. The gas produced leaves the barrel at the muzzle as an expanding gas bubble. At this temperature, the gas is white-hot and visible to humans.
This gas bubble expands too quickly to mix with cool ambient air. This is where the fire damper comes into play. By creating turbulence, the hot gas bubble is mixed with cool air, thereby reducing the surface area of the gases and in turn suppressing photon emission in the visible range.
How the Best Remington 700 muzzle brake works
A muzzle brake is a simple thing in theory and a difficult thing in reality. Simply put, a muzzle brake directs the hot gas flow in a direction we can use.
Newton’s third law states that an action always causes an equivalent reaction. Actio = Reactio. Now, when the projectile begins to move, the recoil begins at the same time. We can calculate the momentum of motion because we know the mass of the projectile and its velocity. We also know the mass and velocity of the rifle.
The first approximation for the recoil is the muzzle velocity multiplied by the mass. For a .223 / 5.56 caliber with a 55grs/3.6g bullet exiting at 910m/s, it is approximately 3280g x m/s as impulse. The rifle weighs 3.5 kilograms.Our initial estimate would be that the rifle will recoil at a velocity of approximately 1.1m/s.
The actual total recoil would be derived via an integral since the bullet does not travel the entire barrel length at muzzle velocity. Same example with a carbine 31 at 175grs bullet weight and a muzzle velocity of 785m/s would give an impulse of 8950g x m/s. The carbine 31 weighs about 4kg and would therefore recoil at twice the velocity as our first example.
Our second assumption: the escaping gases at the muzzle are similar to a jet nozzle. We can calculate as the “jet recoil” of the escaping gases and then add it to the momentum of motion because the direction is the same. If we take the charge from the carbine 31, we may assume at a maximum pressure of 3000bar that about another 1.1m/s recoil velocity is added. This adds up to a movement of 4kg mass with 3.3m/s in the direction of the shoulder. Anyone who shoots the Karabiner 31 knows what this means.
Now what if the “jet recoil” at the muzzle is diverted, i.e. changes its direction? The impulse of the “jet recoil” at the muzzle can, in the best case, completely reverse its direction and “pull” the rifle forward. In the perfect world, this would completely cancel the recoil.
This is the operating principle of the muzzle brake. There are limits to what can be done here in terms of manufacturing technology. The gas jet is diverted to the side and upward, and depending on the angle of the diversion, the impulse of the recoil is reduced. For the mathematics enthusiasts, vector calculation is the keyword here.
Despite all the promises made by the manufacturers, there can be no muzzle brakes that also reduce fire flash. Likewise, there can be no fire muzzle dampers that reduce recoil either.
There are combinations of both on the market, but these are neither fish nor fowl and cannot perform either function properly.