The Ruger 10/22 rifle’s ease of customization is one of the rifle’s most appealing features. There are a lot of 1022 stocks that may be utilized as replacement stocks, for example. Most aftermarket components need little to no minor fitting, and shooters may make their rifle appear like anything from an MG34, Thompson SMG, AR15, or even a future Star Wars style blaster.
Some of the changes, such as aftermarket triggers, extractors, match grade barrels, and target grade stocks, assist tapping into the rifle’s better accuracy potential or make it more dependable. Improved sling mounting options, as well as the ability to utilize a scope or add a spotlight or laser to the Ruger 10/22, are among the other improvements.
Why is the Ruger 10/22 such a great upgrade gun?
The first and most obvious reason to enhance your Ruger 10/22 is because it is very popular. Whether you’re a hunter, a competitive shooter, or simply a recreational plinker, you’ll find a Ruger 10/22 in practically every gun collection.
The 10/22 uses .22 caliber ammunition, which is quite inexpensive, so you can go through a lot of it without worrying about the expense. As a result, the 10/22 is an excellent practice rifle. It makes no difference whether you’re a beginner studying the fundamentals of shooting or an expert preparing for a competition. Another compelling reason to update your 10/22 is the planned use.
Varmint hunting, self-defense, and even full-scale hunting are all common uses for this firearm (with specific models). This rifle may be upgraded to make it a more versatile and effective weapon in your arsenal. Not to mention that it improves your rifle’s general performance and life, which is a wonderful thing to do.
Ruger 10/22 Upgrade Types
There are several aftermarket improvements for the Ruger 10/22. We’ll go through the most well-known ones here. Let’s start with the simplest and most important upgrade: rails and mounts. You can easily install scopes, tac lights, lasers, and other pertinent accessories on your 10/22 if you have a nice pair of Picatinny/Weaver rails and/or scope rings.
The barrel is the next major advancement. It’s time to upgrade to a new barrel after you’ve achieved your existing barrel’s full accuracy potential. A decent barrel can substantially enhance your rifle’s overall accuracy.
Moving on, the trigger is the next key component to update. The factory trigger is little more than the bare minimum. Upgrade to a new trigger if you wish to change the pull and travel time of your current one.
A decent scope or sight is another important component to your weapon. Not only will this extend your shooting range, but it will also improve your accuracy.
Finally, we have the stock, which is the ultimate enhancement. Most of your worries will be addressed if you upgrade to a fully new stock, which will most likely include mounts, a barrel, and a cheek riser. The whole list, as well as a description, may be seen below!
Review: The Best Upgrades for the Ruger 10/22
The greatest 1022 modifications may be found in the list below. Have fun!
The Best Upgrades for the Ruger 10/22 overall: INTERNATIONAL BARRELS – RUGER® 10/22 RIMFIRE PRECISION BARRELS
- Major increase in accuracy, great fit for long range shooting
- Easy Installation
- Very lightweight
What the Latest Buyers reported
According to recent customer evaluations, consumers like the barrel’s accuracy, heat resistance, and appearance. The build quality is claimed to be superb, and the barrel provides elite barrel characteristics at a standard barrel’s weight.
Why we recommend it
Because a barrel is such a crucial improvement for the 10/22, we dug hard to find the finest replacement barrel on the market. Stainless steel, carbon fiber, and aluminum were used to create these barrels.
This is a match grade barrel that is very light in weight and has a match chamber and bore for exceptional accuracy. The carbon fiber shroud offers excellent stiffness while reducing total weight. A pre-installed compensator for recoil and muzzle rise reduction is also included in the comp model.
These barrels are very light due to their design. The barrels come in 16.5-inch and 18.5-inch lengths, respectively, and are offered in regular and match varieties. A barrel mount, cantilever, and scope mount are already drilled and tapped into these barrels.
On the muzzle of the match barrel is a compensator that may be removed as desired. The compensator has a multi-port single chamber that reduces recoil, increasing accuracy and allowing for quicker follow-up rounds.
Who should buy it
For competitive shooters, the barrel is ideal. Basically, owing to its design quality, finish, and balanced weight, it provides remarkable accuracy.
The barrel is also useful for target practice and long-range hunting of smaller targets. Overall, this barrel is designed for professional shooters who want the most from their 10/22.
The INTERNATIONAL BARRELS – RUGER® 10/22 RIMFIRE PRECISION BARREL is very precise, light, and well-balanced, resulting in optimal performance. It takes just a few minutes to set up and even comes with a compensator, making it a fantastic value for money. It can sustain long periods of firing and is an excellent choice for competition shooting.
For your 10/22, the RUGER® 10/22 RIMFIRE PRECISION BARRELS is the greatest barrel modification. A compensator is also included in the match form of the series, which helps to minimize the rifle’s recoil.
Although the barrel seems to be expensive, it is likely to be the sole barrel modification you will ever need.
2: Best Upgrades for the Ruger 10/22: TIMNEY TRIGGERS CALVIN ELITE RUGER 10/22 DROP IN TRIGGER ASSEMBLY
- Easy Installation
- Adjustable weight of trigger pull
- Very durable
- Expensive (but worth it in my opinion)
Why we recommend it
When it comes to the trigger, we’ve found the greatest Ruger 10/22 trigger improvement on the market. The casing of this trigger mechanism is composed of aluminum, and the trigger pull is 2.25 pounds. It’s a single-stage trigger with a broad shoe for easy grip and a pull weight that may be adjusted.
The assembly offers a simple drop-in installation that uses factory pins, so no drilling or machining is required.
The hammer is light, which cuts down on lock time, and an extra-strong spring assures dependable ignition. In addition, the trigger’s pretravel and overtravel periods can be changed. To facilitate easy adjustment of internal moveable elements, the housing incorporates a detachable side plate.
This trigger kit’s deluxe version also contains a CST auto bolt stop, which keeps the bolt open after the final shot has been fired. This newer version works with all 10/22 magazines.
This 10/22 trigger assembly is a one-of-a-kind improvement. The adjustable pull weight allows you to tailor the trigger to your specific requirements.
The assembly comes in a number of colors, so it may aid you with aesthetics as well.
3: Best Upgrades for the Ruger 10/22: PROMAG ARCHANGEL POLYMER DELUXE TARGET STOCK
- Lightweight & sturdy polymer component
- No gunsmithing required with the drop-in installation
- Adjustable and compatible with all 10/22 mdoels
- Doesn’t include a takedown screw
What the Latest Buyers reported
The PROMAG ARCHANGEL POLYMER DELUXE TARGET STOCK is one of the unique items on the market that has received no negative feedback. Its lightweight and sturdy architecture, as well as the flexibility to utilize both light and heavy profile barrels, which is attractive for many users. The stock is simple to set up and has a lot of customization options.
Why we recommend it
This stock is comprised of polymer, a lightweight and durable material. This stock is totally modifiable for a 10/22 chassis thanks to M-Lok slots, adjustable LOP, and reversible barrel tray. The stock does not bend or jiggle under any conditions, and the fit is perfect.
This Magpul modified stock is a one-stop shop for improving your 10/22. The stock is constructed of polymer and is hence lightweight. It has a reversible tray and a free-floating barrel design that works with all lengths and kinds of barrels intended for the 10/22.
The pistol-style grip handle provides a secure hold on the handgun for quick and easy operating. Spaces may be used to change the length of the pull, allowing you to fire regardless of the length or position of your arm.
In addition, the manufacturer offers adjustable cheek risers as an alternative. When you fire, a non-slip rubber butt cushion keeps the gun from hurting you or slipping. The stock comes with a variety of sling mounting options and is M-LOK compatible for adding extra attachments.
Who should buy it?
For competitive shooters and hunters, this stock is ideal. Obviously, this is owing to the fact that the stock is compatible with practically every attachment for the Ruger 10/22. It’s also useful for target practice and exposing a novice to the world of tactical weapons.
For the Ruger 10/22 rifle, the PROMAG ARCHANGEL POLYMER DELUXE TARGET STOCK is the finest aftermarket stock. It’s small, durable, and gives the shooter a lot of customizing choices. This stock brings out the best in your 10/22 and is reasonably priced to fit many budgets.
The PROMAG ARCHANGEL POLYMER DELUXE TARGET STOCK is a fantastic complement to your rifle. You’ll save money on extras like mounts and risers if you get the stock. It’s also resistant to natural elements because to its polymer-based design.
4: Best Upgrades for the Ruger 10/22: HIVIZ LITEWAVE FRONT/REAR INTERCHANGEABLE 3-DOT SIGHT SET FOR RUGER 10/22
- High sights, which are easily seen over the scope rail
- Quick acquisition possible with the green optics
- Sturdy CNC machined metal construction
- May shoot a bit high at very close range
What the Latest Buyers reported
The low cost, simplicity of installation, and high placement are the most popular features among consumers.
While the sights are composed of metal, which provide sturdiness, users also compliment the sight’s ability to quickly acquire targets.
Why we recommend it
Improving the sights on a basic Ruger 10/22 rifle is one of the strongest modifications. Most shooters would still choose a new scope, but if you’re on a budget or just like iron sights over glass, a new set of sights like the red and green pair from HIVIZ LITEWAVE FRONT/REAR INTERCHANGEABLE 3-DOT SIGHT SET would satisfy.
This aftermarket sight for the Ruger 10/22 is a low-cost and rapid replacement for aftermarket sights. The mix of green and orange colours, as well as the large diameter, allows for immediate and simple acquisition. Furthermore, the shooter will benefit from the elevated front sight. The back sight is also adjustable, which is a nice feature.
HIVIZ LITEWAVE FRONT/REAR INTERCHANGEABLE 3-DOT SIGHT SET collects available light using fiber optic tubes in a range of colors to make the sights sparkle brilliantly throughout the day.
These sights are somewhat enlarged to allow for a custom fit to the shooter’s weapon. The rear sight is fully adjustable for windage and elevation once mounted.
Who should buy it
Competitions, hunting, and practice may all benefit from these sights. In both day and low light circumstances, the mixture of colors allows for easy sighting. These visuals are also beneficial to older folks who have poor vision. In the event that the necessity arises, these sights might also be useful for home defense.
The HIVIZ LITEWAVE FRONT/REAR INTERCHANGEABLE 3-DOT SIGHT SET is a low-cost and effective substitute for your 10/22’s factory sights.
These sights are made entirely of metal and do not need batteries or routine maintenance. If necessary, the fiber optic line may be quickly changed.
5: Best Upgrades for the Ruger 10/22: LEAPERS UTG TACTICAL SCOUT SLIM MOUNT SYSTEM FOR RUG 1022 FREE FLOAT BLACK
- Made from lightweight & very high quality aluminum
- Easy Installation with Pre-drilled holes & included screws
- Fits with most scopes
- Doesn’t fit with very specialized optics
What the Latest Buyers
According to most consumers, this free float rail provides excellent value for money, flawless fit, and exact operation.
The rail is simple to put together and includes mounting screws. It’s really light and complements the look of your 10/22. It can be installed without any modifications and features a low profile for improved rifle handling.
Why we recommend it
This rail is low-profile and comes pre-drilled with holes. It also contains mounting hardware. The bottom of the rail is perfectly formed to match the receiver, and there are 11 slots (4.9 inches) to offer enough of mounting space. It can be used with iron sights thanks to the V-cut design, and the finish is just right to survive the test of time.
It’s constructed of aluminum and is built by LEAPERS UTG, but it’s meant to be used with 22 rings for a groove kind of mount, not the Weaver or Picatinny style that the factory mount looks like. UTG overcomes this by producing a real Picatinny mount that fits into the rifle’s receiver’s pre-drilled holes.
Who should buy it ?
This rail is ideal for anybody who wishes to attach a scope on their Ruger 10/22. It might be a plinker, hunter, or even a competitive shooter.
The rail is required to attach an optic, such as a scope, BUIS, or red dot, over the rifle.
The LEAPERS UTG TACTICAL SCOUT SLIM MOUNT SYSTEM FOR RUG 1022 FREE FLOAT is a low-cost yet essential addition to your 10/22. A rail on your rifle will enable you to attach optics, which are necessary for shooting at long distances.
This rail also enables you to utilize your iron sights, and it comes with all of the necessary mounting hardware.
The Ruger 10/22 is one of the most widely owned and used rifles in the world. Despite the fact that it fires a less-lethal .22LR cartridge, it is an excellent weapon for practice, training, and hunting.
The Ruger 10/22 is a straightforward and dependable weapon. However, with the right accessories and upgrades, it will be a tough competitor for modern tactical rifles.
The Ruger 10/22 in the Past and Present
The Ford Mustang, Buffalo wings, the Moog synthesizer, and liquid crystal display (LCD) were all introduced in 1964, along with a slew of other iconic American inventions, not least the Ruger 10/22.22 Long Rifle semiautomatic carbine. It’s one of the best rimfire rifles ever designed, and it’s sold in the millions.
Introduced as a rimfire companion to the brand new at the time.
50 years later, the 10/22 is still one of the most popular rifles, especially combined with the Best Ruger 10/22 Upgrades & Modifications.
There are 22 rifles in total. It’s extremely accurate and dependable. The detachable 10-shot rotary magazine is convenient and effective.
Ruger now offers the 10/22 in a variety of models, including Carbine, Compact, Sporter, Tactical, Takedown, and Target. It has also been offered in other countries over the course of its existence. I’m aware of at least 20 different versions, but when a shooter opts for the 10/22, he gets autoloader perfection regardless of the configuration.
Operation of the Ruger 10/22
The bolt is held closed by a closing spring and hammer pressure against the back of the bolt in the 10/22 action, which is a blowback design. The .22 Long Rifle isn’t a particularly powerful round, with a chamber pressure of around 24,000 psi, so the light pressures required to keep the bolt closed in the 10/22’s action are perfectly acceptable.
The bolt travels rearward and hits the boltstop pin when the rifle is fired. The back face of the bolt has a groove and a cam that causes the bolt’s end to dip slightly when it hits the stop pin.
This action gives the new cartridge enough time to feed into the magazine. This is one of the reasons why the magazine rotor spring tension does not have to be massive, making it easier for the shooter to load the rotary magazine.
The trigger guard has a small thumb latch on the front that, when pressed, locks the bolt in the open position. The latch is pressed after the bolt is pulled back to open it. The latch must be pressed again to release the bolt. As with other semiautos, the bolt cannot be dropped by retracting and releasing it. Ruger created this as an extra layer of protection.
The standard safety is a crossbolt type that is located near the thumb latch on the front of the trigger guard. To activate the safety, the rifle must be cocked. The safety displays a red line when in the “Off” position, indicating that the rifle is ready to fire.
Configurations of the 10/22 rifle
The Best Ruger 10/22 Upgrades & Modifications are currently available in the list above with certain configurations, as previously stated. The Carbine is my personal favorite, and I believe it is the most popular configuration in the lineup. Let’s take a look at some of the various configurations that this classic autoloader has been available in since its inception, as well as the current configurations.
The 10/22 had a plain American walnut military carbine-style stock, a blued 18.5-inch round barrel (with six grooves and a 1:16-inch twist rate), a blued aluminum-alloy receiver (produced by the investment casting process made famous by Bill Ruger Sr.), a folding rear sight, and a gold-bead front sight in its original configuration.
It used Bill Ruger Srnow-famous .’s 10-shot rotary magazine (for more on this historic design, see the accompanying sidebar), and the receiver was drilled and tapped for a dovetail rail that allowed the use of narrow-base. It had 22 scope rings and weighed only 5 pounds. In 1964, the MSRP was $54.50.
The standard 10/22 was renamed Carbine in 1965, and the stock was changed to a plain “hardwood” or birch or maple stock. In 2008, the birch stock was phased out. Limited-edition Carbines featured laminated-wood stocks in a variety of color schemes.
The 18.5-inch barrel, folding rear sight, and bead front sight are all standard features on the current Carbine. It has a 37-inch overall length and comes with either a hardwood or synthetic stock. Blued or stainless-steel barrels are available.
By the way, the synthetic-stocked 10/22s were previously classified as All-Weather models, then as Synthetic models, and finally as Carbine models. The Carbine is the ideal small field rifle: it’s light, compact, and simple to use.
The Stainless was a variant of the standard Carbine with a stainless-steel barrel, a natural silver-colored alloy receiver, and a hardwood stock. It first appeared in 1992, but it has since been phased out.
The Sporter, which was introduced in 1966 and has similar dimensions to the Carbine but is a little fancier, is still available today. It has an 18.5-inch barrel, just like the Carbine, but weighs slightly more at 5.75 pounds. Because it has a nicer American walnut stock with checkering and sling-swivel studs, it’s more expensive. It doesn’t have a barrel band like a carbine.
It was first known as the Deluxe Sporter in 1980, but it has since reverted to its original name. Although the Sporter is a little more expensive than the Carbine, many shooters believe it is well worth the extra money.
The 10/22 International was once one of the more unique variations available. It came with a full-length Mannlicher-style stock and a choice of blued or stainless-steel barrels. The walnut stocks were used on the first run of this variation, which lasted from 1966 to 1969. Birch stocks were used in a later production run, from 1994 to 2003.
The 10/22 Target is intended for serious tackdriving. With this rifle, accuracy is crucial. It has a 20-inch bull barrel as standard and measures 38.5 inches overall. It’s quite heavy at 7.5 pounds. It comes with a brown or black laminated wood stock, as well as a blued barrel and receiver or a stainless barrel and satin silver receiver.
The Target isn’t equipped with sights, but it’s ready to be mounted with a scope and optic. It has been available since 1996.
The Compact model, introduced in 2006, has a 16.12-inch barrel and a 34-inch overall length. It’s lightweight at 4.5 pounds and has fiber-optic sights instead of the diamond rear and gold bead front. It can be ordered with a hardwood stock.
The 10/22 Tactical model with the Best Ruger 10/22 Upgrades & Modifications is a one-of-a-kind weapon. It comes with either a black Hogue OverMolded stock or a black synthetic stock and a 16.12-inch barrel. A target bull barrel is included with the model with the Hogue stock; the model with the synthetic stock comes with a standard barrel with a flash suppressor. It doesn’t come with sights, like the Target, but it does have a Picatinny rail that allows the shooter to choose from a variety of optics. The Hogue stock has a bipod attached to the fore-end.
Takedown of the Ruger 10/22 rifle
The Takedown model is the most recent 10/22 variation, which was introduced in 2012. I’m a big fan of takedown rifles, and I think Ruger made a great decision by producing the 10/22 in this configuration. And I have to say, the company’s engineers didn’t have an easy time pulling it off.
The Takedown comes with a 16.62-inch or 18.5-inch barrel in satin black or clear matte finish, as well as the standard flip-up diamond rear and gold-bead front sights. Black polymer is the stock.
The fact that this Best Ruger 10/22 rifle with Upgrades & Modifications is shipped in two pieces sets it apart from its brothers. It can be disassembled into separate barrel and receiver/buttstock units, as the name implies.
A sunken lever under the fore-end and a knurled ring around the barrel just forward of the receiver distinguish the Takedown. The bolt must be locked in the rear position before the recessed lever can be flipped forward to disassemble the gun.
The barrel is then turned a quarter turn counterclockwise and slid out of the receiver, forward. A black nylon backpack-style carrying case is included with this model. The setup results in a compact and useful package.
The Ruger 10/22 comes in a variety of configurations, including the Magnum (1999 to 2006).
The Magnum (1999–2006), the Fingergroove Sporter (1966–1971), the 10/22 Rifle (2004–2006), the 10/22 Target Rifle (2001–2002), and the 10/17 Carbine are some of the other configurations that have come and gone (2004 only).
The Magnum had a blued 18.5-inch barrel, a steel receiver, a hardwood stock, and a nine-round rotary magazine, and it was chambered for.22 WMR. The Fingergroove Sporter was a.22 LR carbine with a beavertail fore-end and a Monte Carlo-style stock.
The 10/22 Rifle was a 20-inch barreled.22 LR rifle with a hardwood stock. The 10/22 Target Rifle had a 20-inch stainless-steel heavy barrel with an adjustable comb and buttplate, as well as a synthetic thumbhole stock. The 10/17 Carbine had an 18.5-inch barrel, a steel receiver, and a birch stock and was chambered for.17 HMR.
Variations on the Ruger 10/22
The Best Ruger 10/22 Upgrades & Modifications have been offered in a number of commemorative and distributor special editions in addition to the cataloged variations. I won’t go over all of the configurations, but the MSP (Military and Special Police), the “FBI” gun, and the 40th Anniversary model were all very interesting.
The MSP was a carbine with a silencer that was designed for law enforcement and military use. The FBI model had laminated-wood stocks in reddish brown, light walnut, and tan colors, and they were marked FBI 00000 to 01500 (Faber Brothers Inc., not the Federal Bureau of Investigation).
The walnut stock on the 40th Anniversary 10/22 (2004 only) featured a special medallion inset in the buttstock commemorating the Carbine version’s 40th birthday. This year, there’s also a special 50th Anniversary model. For more information, see the sidebar on page 50.
My 10/22 rifle
I was not familiar with the Best Ruger 10/22 Upgrades & Modifications, when I’ve only ever used the Carbine version. I was visiting with my father at our home in southern New Mexico one afternoon in the early 1970s when a package arrived. When my father opened it, he discovered a brand-new 10/22 rifle. On the top of the receiver, it had been factory engraved with full coverage.
Dad said, “That Steve Vogel.” Vogel was a major player at Ruger. “Wasn’t that thoughtful of him?”
The words “Bart Andrews 1972” were stamped on the side of the receiver when Dad turned the gun sideways.
Dad growled as he handed me the rifle, “Here, kid.”
That little rifle became a constant companion for me. I’d load it up and drive into the desert when I got home from school. It’s impossible for me to say how many rabbits I shot with it. With that 10/22, I also got quail and coyotes. I loaded it with an untold number of.22 LR cartridges and fired them through it. Unfortunately, I fired it so frequently that a hairline fracture appeared on the left side of the receiver, and my father, much to my chagrin, forced me to put the rifle away forever.
Dad finally persuaded me to sell the 10/22. He had a buyer for the rifle who was a serious Ruger collector, and I needed money for education. That small gun turned out to be the only factory-engraved 10/22 ever to leave Sturm, Ruger.
I got another Carbine shortly after selling the engraved 10/22, which I still have. It’s one of my all-time favorite little weapons.
I’m not sure Ruger will be able to improve on the already Best Ruger 10/22 with Upgrades & Modifications, but I have no doubt this classic will continue to be a huge success for at least another 50 years.