5 Best .300 AAC Blackout Suppressors & Silencers
Are you searching for the right suppressor for the .300 Blackout rifle?
You have come to the right spot, if you are. A.300 Blackout weapon can be very noisy.
But, using a high quality suppressor will reduce the volume of a shot significantly.
We’ve taken the liberty of selecting five of the newest & strongest .300 Blackout suppressors on the market.
You should also think about the lawfulness of the suppressors (and where they may or may not be legal) when we proceed through our review.
We’ll also give you a short tutorial about how to pick the right blackout suppressor.300.
Suppressors – Are they legal?
The quick reply: it varies form jursidiction to jurisdiction.
The long response is it’d depend in the state you ‘re staying in.
Silencers are officially legal in 42 states.
Eight states are prohibiting the use of suppressors:
California, Delaware, Hawaii, Illinois, Massachusetts, New Jersey, New York and Rhode Island.
Also if the state requires suppressors to be used, double verifying will be wise for you.
Many states may disallow the usage of suppressors even though they are not prohibited by state statute.
For clarification, you may bookmark this article & check back to make sure that your state is one of the 42 states where it is legal to possess and use a suppressor.
What to look for when picking a .300 Blackout Suppressor
It is beneficial to understand which .300 Blackout suppressor would better be focused on your specific wants and needs.
Simultaneously, you may need to weigh a few considerations which will play a role in your final decision.
If it’s your first time buying a blackout suppressor.300, you may want to pay careful attention to what you might be searching for.
Several elements and functionality that you will be searching for are as follows:
Performance is perhaps the most critical factor to remember while looking for a suppressor.
The quality rating would depend upon the materials from which the suppressor is made.
Manufacturers would most of the time utilize products such as titanium or steel. all of the suppressors here are known to handle some heavy beatings, and should still be able to tolerate some degradation or corrosion of some sort.
Obviously it needs to be mounted on your gun’s muzzle in order for the suppressor to function.
Most of the suppressors listed here are likely to be quick to mount suppressors that don’t need any hardware or skilled gunsmith ‘s expertise.
Most are welded in order to ensure rapid attachment and detachment.
Reduce Noise output
The lower the volume of sound of the shot, the stronger.
That is one thing you should consider when looking for a silencer. Look for a silencer which holds your gun’s noise below 140 decibels.
You will shoot your .300 Blackout weapon at those heights without any ear safety support.
When the noise rates are a bit too noisy though, you should also use ear protection.
This may actually be recommended if you plan to use your .300 Blackout in extended shooting sessions.
The Top .300 Blackout Suppressors Analysis
Here is a collection of the best .300 blackout suppressors on the market as of this article.
Since the selection is sure to shift over the next year, now is your opportunity to pick one of those items as your own.
Until ordering, we trust at this stage you’ve made sure you’re free and clear of any potential legal problems that could come from purchasing or possessing a suppressor.
Once you have miles of clear, blue skies, you can check this list below. Having said that, let ‘s continue with our list:
Best .300 AAC Blackout Suppressor: Advanced Armament – Cyclone Suppressor
- Increases accuracy
- Very durable built
- Easy to install on a .300 Blackout rifle
- Almost no gunshot audible
Best .300 AAC Blackout Suppressor
First on the list we’ll have a peek at the Advanced Armament brand’s Cyclone Suppressor.
This is a CNC-machined silencer built to reduce the sound of the shot of your .300 Blackout.
At almost the same moment, you ‘re going to undergo a significant drop in recoil.
This is made from high-quality materials that are also designed to handle a great deal of heat that comes from firing off shots continuously.
It is planned at the same time to reduce the fouling and muzzle hop.
If you believe your .300 Blackout gun requires ear protection, think again.
This would reduce so much vibration this actually contemplating having some form of ear protection will be futile.
If you’re looking for a suppressor that’s considered the best of the best so far for your .300 Blackout rifle then look no further than the Advanced Armament Cyclone.
Verdict: Best .300 AAC Blackout Suppressor
On its portion, this suppressor performs a fine job at blocking the bulk at noise.
Around the same moment, that loads of rebound and muzzle jumping does a nice job.
So you are not only getting a good silencer, but also something that can double as a break in the muzzle.
You are having quite the whole kit from the looks of it.
It is no surprise that we awarded it the “best overall” honours.
2nd Best .300 AAC Blackout Suppressor: Gemtech – GMT-.300BLK
- Extremely silent
- Recoil reduction around 75%
- Great compatibility with all .300 Blackout rifles
- Might need some individual adjusting
2nd Best .300 AAC Blackout Suppressor
Next we’ve got the Gemtech GMT-.300 Blackout Suppressor.
By looking at this suppressor, you’ll notice this is a simple to assemble suppressor, easy to install.
It is made from G-core titanium material to ensure durability is the best.
It also creates a silent noise which can be tough to compete as it is up against certain related products.
The important thing to note is that if you can get the sound of your rifle shots to about 130 decibels, you ‘re not going to need to use any kind of ear protection.
This suppressor is expected to get it down to 36 decibels at maximum.
Now that’s really impressive.
Whether you are doing supersonic or subsonic.300 Blackout rounds, you will operate in all styles of rounds in an element mask.
When you’re searching for anything like this, so perhaps the Gemtech is the one you ought to go for.
If you’re hunting or trying to stay discreet in a case of home defence, this suppressor should find its applications as the situation requires.
Verdict: 2nd Best .300 AAC Blackout Suppressor
The power to make the shots as silent as possible is the amazing part about this suppressor.
You should also do away with your ear plugs when aiming the weapon, even at noises of 130 decibels or more.
If you’re looking to be the silent but deadly hunter, or if you want to be as quiet as possible when taking on invaders and prowlers from home, the Gemtech suppressor may just be exactly what you’ll need.
3rd Best .300 AAC Blackout Suppressor: Silencerco – Omega Multi Caliber Quick Detach
- High quality materials
- Easy to mount
- Significant noise reduction
3rd Best .300 AAC Blackout Suppressor
Next, best for the money, we’ll be looking at a .300 Blackout suppressor.
When you’re on a budget, you’ll be happy to hear that if what you’re doing is searching for a suppressor for your.300 Blackout, you won’t be left out in the dark.
We are giving you the Silencerco Omega Suppressor, with that said.
This is designed for multiple calibers, and can be removed quickly.
The Omega is made of stainless steel, titanium, and copper alloys.
You are staring at one challenging silencer for consumers in simple English.
If you’re looking for something to help you reduce a lot of noise on your.300 Blackout without breaking the bank, you ‘d probably love to have a silencer in your arsenal like the Omega.
The good news is that not only does it work with.300 Blackout rifles, it can also fit other calibers such as 5.56 NATO or the.223.
It can work on any of these calibers and is realistic and flexible.
Not bad for something deemed a “budget suppressor.”
This item’s design features a break at anchor. It is designed to offer a decreased amount of recoil and no muzzle leap to your Blackout rifle.300 That will of course lead to better rifle control and accuracy.
Imagine tossing a weapon to operate with with little to no recoil to muzzle hop.
You should be crazy not to want this.
Go no further than the Omega Suppressor as your next potential option if you are searching for a product that can also act as a muzzle brake. It is the best suppressor you can get at the most budget-fit size.
Verdict: 3rd Best .300 AAC Blackout Suppressor
In short, this suppressor impresses us quite a bit.
And if you’re searching for one that can certainly do a better job of decreasing the noise and reducing recoil, there’s no question that your best alternative is the Silencerco Omega suppressor.
Which does a lot better than most of the other low-cost suppressors, even at a price you can bear.
It may be low in price, but it performs like it deserves a tenfold higher price.
4th Best .300 AAC Blackout Suppressor: Operators Suppressor Systems
- Increases accuracy
- Solid reduction in noise levels
- Highly durable
- Sits a bit loose
4th Best .300 AAC Blackout Suppressor
Next, we’ll take a look at the Operators Suppressor Systems silencer.
This product is made of high-quality materials that render this suppressor a very sturdy item that can be attached to your blackout weapon.
Very importantly, OSS utilizes stainless steel, cobalt, titanium, and copper to render this silencer a really durable tool that should be able to withstand any single bullet you shoot off.
You would really anticipate this to be impervious to heat, degradation and violence of all sorts.
If you’re looking for a suppressor built to last a very long time, you’ll probably want to look even deeper into this.
If you want the greatest reduction in noise this element will reduce gunshots to about 130 decibels.
You won’t even need to use some sort of ear protection at this point.
You’ll be right around the noise level where a gun sans earplugs can be fired safely.
The silencer is interchangeable, and can work within the AR-style family with all kinds of calibers.
If you want a suppressor not just for your blackout.300, but even for an AR-15 or a Creedmoor rifle, you might want to make good use of this tool.
This silencer is even able to function with certain muzzle brakes.
If you mix that with an STS muzzle brake, you’ll witness not only the finest of quiet firing, but also a lot of reduction in the recoil and less muzzle hopping.
Put them in and they’ll stay on nice and tight all the time you ‘re using your rifle.
Verdict: 4th Best .300 AAC Blackout Suppressor
If you are looking for a suppressor that has the ability to be interchangeable and can work with just about any AR-style rifle, the OSS suppressor is worth the investment.
When you’re pleased with this model, with every extra weapon you may have, you’ll want to purchase one.
This is why you would agree, of course, that this suppressor is the only option.
The OSS suppressor can be hard to beat for the best in silent shooting and for reliability all around.
5th Best .300 AAC Blackout Suppressor: Sig Sauer Suppressor 7.62mm
- Easy to put on and take off
- Good noise reduction
- Very light
5th Best .300 AAC Blackout Suppressor
We’ll be having a peek at the Sig Sauer brand for our final suppressor.
Sig Sauer is perceived by loyal firearms owners to be one of the finest brands in the industry.
If you’re a seasoned gun owner, you ‘re definitely going to purchase just on the name.
Other than this, this is a suppressor that should operate for almost any single AR-style weapon like the.300 Blackout.
This has the potential to produce mid-range or long-range, quiet and deadly fire.
Of course that depends on the rifle you ‘re using.
With almost any activity for your Blackout rifle.300, this will certainly be useful as well.
Crafted from Grade 5 titanium, consider this suppressor to be pretty difficult to manage.
This will deal with just about any weather, abuse or corrosion.
If you’re looking for a suppressor that’s going to last so long it’s likely to stay with you for years (or decades), then the Sig Sauer suppressor might just be what you ‘re seeking.
That has the ability to reduce your shots’ noise to just about 137 decibels.
That means you can shoot off your gun and yet have no ear protection to use.
Verdict: 5th Best .300 AAC Blackout Suppressor
The Sig Sauer shows yet again that when it comes to firearms and weapons, they ‘re a good company to go for. If you’re the kind of gun owner searching for a brand to focus on, offer the Sig Sauer a try.
If you so chose to you can continue by buying this suppressor.
Apart from this, you will minimize only enough noise that any time you ‘re out on the field or on the range, you can only take the earplugs out.
You are going to get quiet, aiming reliably like nothing else.
If you are searching for just this, let this silencer be the newest addition to your blackout rifle.300.
The perfect suppressor for .300 Blackout is out there for you.
Please consider the list of suppressors mentioned, along with the variables that may be used to affect your final decision.
Using a silencer would make you gun fire with less noise which also isn’t going to be too noisy for anyone around you.
Simultaneously, you ‘re going to feel a bit discreet when you’ve got one of those suppressors on your blackout.
Having said that, if you need more details regarding suppressors, please refer to the FAQ segment below.
People asking also
To make it easier to search for your next.300 Blackout suppressor, it’s important to consult the frequently asked questions.
This will explain any potential questions that you may have while finding a suppressor of your choosing. Below are few questions:
Wearing out Arms Suppressors?
The quick reply: depends.
The long answer: How old the suppressor is is the significant factor.
Many of the new suppressors these days would not be able to fit as quickly as the old school suppressor. Around the same time, it won’t be prone to rapid wear if the suppressor is solid and stable.
Are silencers compatible with every Rifle?
Ususally yes. The silencer must however be welded a certain way to fit the gun for which it was designed.
So certain silencers will in fact be equipped for other styles of firearms.
Similarly, the same can be done for certain rifle types too.
Are silencers the same thing as suppressors?
Yeah. The only distinction in this is the word.
More so, silencer is the legal way to say suppressor.
The above is therefore something of a scientific word. You should name it whatever you want, any way.
Can you build a suppressor legally?
Sure, you can create a suppressor, lawfully.
Only make sure you obey the rules and instructions as though you were producing a legitimate, licensed, NFA-approved weapon.
Know, it may rely on certain laws and regulations in your area or state as well.
Once again, step on the cautionary side and test the rules of your state and ensure sure you’re safe and clear of any legal problem that may occur.
Silencers: What you need to know about the technology
A single shot can cause lasting damage to the hearing of hunter and dog.
Silencers provide a remedy. We explain technical possibilities and limits.
The desire for the highest possible damping performance is understandable.
Even a comparatively low damping value of 20 decibels is equivalent to a reduction in sound pressure by a whopping 90 percent!
Even in this class of mostly very compact and light silencers, you do your and your hunting dog’s ears a lot of good.
With many hunters, however, the pain threshold is only undercut with a noise reduction of 25 to 30 decibels, so that one should then resort to more powerful models.
Silencers offer the hot and highly charged gases flowing out of the muzzle a space in which the extremely high pressure can be reduced.
When the gases then escape from the silencer into the environment, the much lower pressure produces an audibly quieter bang.
The more volume the damper provides for this, the greater the relaxation effect.
Very large dampers therefore generally reduce the noise of the shot better.
However, at some point in time, the practicability of this is limited by diameter, length and weight.
In the silencer itself there are orifices that divide the inner life into different chambers.
When the bullet passes through, the openings in the baffles are temporarily displaced so that the gases behind them can only spread from chamber to chamber step by step.
Depending on their design, the orifices also cause turbulence in the gas flow: this helps the gas to flow out over a longer period of time.
This also helps to reduce pressure peaks.
The cooling of the vapour gases through heat absorption of the silencer also has a considerable effect, which additionally leads to a pressure reduction.
Silencers are usually made of the following materials:
Steel silencers have a very good heat absorption.
They are generally inexpensive and extremely robust.
On the other hand, they can rust if not cared for properly and are quite heavy compared to other materials.
Most hunting silencers are therefore made of aluminium.
Although they are usually a little less durable, they have less influence on the weapon balance and are corrosion resistant.
If you want to dig a little deeper into your pocket, you can go for titanium, which is more wear-resistant than aluminium.
Basically, the service life of silencers made of all materials available on the market is in the four-digit range for shot numbers.
They will therefore last at least “half a hunter’s life” without difficulty – as long as they are not overheated in longer series.
If you want to practice hard in the shooting range, it is best to use silencers made of steel.
If you can’t get away from the comfortable aluminium model, you should be disciplined:
As long as you do not exaggerate and – regularly – take breaks to cool down the equipment, even light models made of titanium or thick-walled aluminium shocks will survive high numbers of shots without damage.
The extremely light carbon silencers, on the other hand, are the worst choice for longer training in shooting movies.
Due to the material, they cope worst with the heat during longer series and run the risk of being damaged.
Not quite as long
Classic silencers have a thread at the rear end for fixing to the barrel.
They build in almost full length to the front and increase the overall length of the weapon accordingly. In contrast to this, the so-called telescopic or overbarrel silencers put their rear end over the barrel; the thread lies approximately in the middle of the silencer.
Both constructions have their advantages and disadvantages:
With the telescopic silencer the weight is a bit closer to the shooter, so that the balance of the weapon is usually a bit better.
At the rear end they have a plastic guide ring which is turned to the barrel diameter and serves as an additional contact point.
For an overbarrel silencer an open sight must be omitted. It is also no longer possible to mount the front sling swivel close to the muzzle.
With the classic standard rear shock, however, the front sight can remain in place.
If you choose models with a diameter of 40 or 45 millimetres, the sight line remains free in most cases and the open sight can be used despite the shock.
If possible everything from one source
A muzzle thread is a prerequisite for the attachment of a silencer to the weapon.
It is therefore recommended to always order a muzzle thread when ordering a new weapon.
If you have to have it retrofitted, difficulties may arise:
As a rule, the barrel bore is never completely aligned with the outer contour of the barrel.
If the gunsmith then simply clamps the barrel in the lathe along the outer contour, an alignment error can occur when the thread is attached.
If the muffler’s core is not exactly in the direction of the barrel’s core axis, the bullet’s aperture contacts may occur.
Serious damage to the silencer is very rare, but the firing performance of the weapon deteriorates significantly.
It is therefore absolutely necessary to place your gun in expert hands and ideally buy the silencer where the thread is also attached:
If the gun does not fire, the complaint is limited to one contact person and mutual blame is avoided.
Thread depending on barrel diameter
Silencers can be supplied by the manufacturers in all common threads.
When selecting the thread, the expert will orientate himself on the outer diameter of the barrel near the muzzle.
As a rule, a fine thread two millimetres smaller than the barrel diameter is best suited.
A 17 millimeter thick barrel should therefore be fitted with an M15 x 1, while an M17 x 1 fits a 19 millimeter barrel. If a thread with a difference of less than two millimetres from the barrel diameter is chosen, a sufficiently large shoulder is missing.
However, this is important for the correct alignment of the damper.
If you use considerably smaller threads, the reduced wall thickness, especially on hammered barrels, risks a muzzle expansion that is detrimental to precision.
In any case you have to make sure that you get a nut that protects the sensitive thread from damage when no damper is mounted.
Silencer Care for the Best .300 AAC Blackout Suppressor
Some silencers are modular, so that length, weight and performance can be changed almost at will by adding or removing orifice elements.
They also allow complete disassembly for cleaning.
Other silencer models can be opened for cleaning, but their composition cannot be changed.
Still other models are completely encapsulated: They can only be cleaned in an oil or ultrasonic bath.
Especially with steel silencers this makes sense because of the danger of rust.
This is because the deposits inside are hygroscopic, which means they bind moisture.
If you think this is too much effort, you should apply a short spray of oil to the interior after use and make sure it dries thoroughly.
From time to time, residues can be shaken out.
Under no circumstances should the weapon be stored permanently with the silencer mounted, otherwise corrosion at the muzzle will quickly occur.
One of the Best .300 AAC Blackout Suppressors for several weapons
Basically the hunter can use one silencer on several weapons.
It is only important that the size of the aperture openings also matches the caliber.
For example, the use of a .222 silencer on a 9.3 mm rifle is automatically forbidden: The 9.3mm bullet simply won’t fit through the silencer.
In the reverse example, the use of a 9.3 mm silencer on a .222 rifle is possible without difficulty, even if the silencing performance is somewhat reduced.
Some manufacturers offer products with exchangeable front parts or covers, so that the silencer can be converted for use with other calibers.
If you have several weapons in the same caliber, but with different muzzle thread types in the cabinet, it is also possible to use one silencer for all weapons:
Many products have interchangeable threads, so that you can use the one that fits your weapon.
Another variant offers the mounting of silencers on muzzle brakes.
Here, several weapons with different threads are equipped with a suitable muzzle brake or muzzle flash suppressor.
These then all offer the same interface for the silencer.
In some cases, manufacturers offer quick-coupling systems that eliminate the tiresome process of screwing and unscrewing.
What silencer caliber?
For use with silencers, short-barreled weapons are particularly suitable, so that the rifle still remains manoeuvrable despite the extension.
The disadvantages of a short barrel, i.e. stronger recoil and more muzzle flash, are more than compensated by the silencer.
Rifles with a barrel length of 45 to 50 centimetres are particularly well suited in combination with a centre cartridge with a comparatively small case volume, e.g. .308 Win. or 8 x 57 I(R)S.
Magnum calibers require special
Magnum cartridges can also be easily tamed with a silencer.
However, a radical barrel shortening makes less sense here, as the performance advantage of the cartridges is lost and the load on the silencer increases considerably.
In any case, Magnum silencers should then be used, which are adapted to the larger swath gas volumes.
One more positive side effect of using a silencer should be mentioned at the end: it usually increases the precision of the liner noticeably.
What types of silencers are there?
There are currently three types of silencers on the market. Those who are familiar with weapon technology will quickly recognize the screw-on-suppressor.
The silencer with thread can be quickly screwed onto a barrel with thread. Every gunsmith knows them and has different versions in stock. The only conditions that have to be fulfilled are a weapon whose barrel has a thread, the appropriate caliber diameter and the engraved serial number, which is registered in the WBK. This type has been produced in large quantities since about 1980.
The silencer with quick release uses an adapter or a special muzzle brake on the barrel. They are available with and without a lock.
The integral silencer is relatively new. I saw the first integral damped weapon in late 2015. The silencing technology is integrated directly into the barrel. The barrel and silencer are one piece. If you choose this type of weapon, you will either have to buy an integral silencer or have your existing weapon equipped with an integral silencer barrel. The idea of an integral silenced rifle barrel is finding more and more interest, especially in the USA.
Both the Blaser R8 Silence and the Steyr Breeze are not purely integral damped weapons.
Both manufacturers take a middle course and offer extremely short-barreled weapons with an over-barrel silencer over the entire barrel.
The actual barrel of the Blaser R8 Silence is 42cm and that of the Steyr Breeze even only 40.7 cm (with caliber .308 Winchester).
With the silencer screwed on, the guns are then (as usual) 115 or 117 cm long.
Advantages of the Best .300 AAC Blackout Suppressor
The “standard silencer” with thread is available everywhere, widely used and easy to clean.
Also for screw-on silencers, there are now multi-caliber silencers available, such as the Nielsen Sonic Ghost 50, which can be shot on several guns with different calibers.
The quick release has the advantage that the silencer can easily be changed from one gun to another (if both guns have an adapter mounted).
You often see shooters changing a .308 Win silencer with quick release to a .223 Rem.
The second advantage is the locking mechanism which prevents the silencer from coming loose when the gun gets warm (e.g. when training in the shooting cinema).
The integral silencer has the advantage that the heat is dissipated evenly and well and the silencer does not interfere with magnifications of < 4x even with small riflescopes.
In addition, it does not bring any possibly disturbing extra weight to the muzzle of the weapon and thus is less disturbing.
In general, silencers improve the accuracy of the weapon and the shooter (technically and psychologically).
Technically speaking, there is less turbulence at the muzzle, which affects the trajectory of the bullet, and psychologically speaking, there is considerably less recoil and less interference from the gunshot.
Therefore one “mucks” less.
Disadvantages of the Best .300 AAC Blackout Suppressors
In general, all types of silencers have the disadvantage that the weapon becomes heavier.
Especially the screw-on and quick-release silencers mounted on the muzzle make the gun a bit top-heavy.
To counteract this, there is a version as an “over-barrel” silencer, whose thread (or quick-release fastener) is not in the end but inside the silencer.
With such a silencer the front sight must be removed in any case.
The integral silencer or integral silenced gun has the additional disadvantage that I am not allowed to go hunting with the gun in (federal) countries where hunting with silencers is prohibited.
A further disadvantage is, in my opinion, the fact that one is technically committed.
If in a few years better or different silencing technology is developed, you cannot change.
The weapon becomes more dirty when shooting with silencer.
This is due to the fact that pressure builds up in the silencer, which is discharged forward after the bullet has passed through it.
Due to this ram pressure, a little more gun smoke remains in the barrel.
Does it only “piff” when I shoot with silencer?
It is not quite like in the movie. This is because the shot is actually composed of two bangs.
One is the muzzle blast, which is caused by the gases (which drive the bullet) at the muzzle suddenly expanding and creating an explosive bang.
You can influence this noise with the silencer.
The second bang is caused by the bullet flying at supersonic speed.
Like the bang of a fighter jet breaking the sound barrier in flight.
The silencer cannot influence this supersonic bang.
It is, by the way, the louder component of the gunshot.
The only way to make it as quiet as in the movies is with a silencer and subsonic ammunition.
But they have so little energy that you cannot shoot hoofed game with them.
Is it possible to shoot with a silencer without hearing protection?
A silencer must reduce the sound pressure level by at least 20 dB(A).
It is important to know that a reduction of 6 dB(A) already means a halving of the volume.
Here are a few examples for better understanding:
- In a quiet room you have a sound pressure level of 20-30 dB(A)
- A normal conversation has 40-60 dB(A)
- The TV at room volume has 60 dB(A)
- A main road 80-90 dB(A)
- In the disco (in the club) there is a jackhammer volume of 100 dB(A)
- A commercial aircraft at a distance of 30m has 110-120 dB(A)
- And a .308 caliber Winchester rifle shot at about 160 dB(A)
Hearing damage occurs when a sound pressure level above 120 dB(A) is applied for a short period of time and the pain threshold is between 130 and 140 dB(A).
So if the silencer lowers the sound pressure by 23 dB(A), which most silencers can do, it no longer hurts in the ears when shooting.
However, there is still the risk of hearing damage.
The hunting dog, which sits under the pulpit, is probably already far enough away to not suffer any more damage.
How heavy is a silencer
15 years ago, silencers were permitted as part of health protection in England and some (few) other countries on the basis of “Directive 2003/10/EC of the European Parliament and of the Council”.
At that time silencers had an average weight of 650g. Today there are silencers for large calibre weapons with less than 200g.
Is the muzzle flash reduced?
Yes, very much so in fact. In almost all cases, the muzzle flash is no longer visible through the rifle scope.
Does the silencer interfere with the optics?
A silencer with a diameter of 50mm can no longer be seen through the riflescope at a magnification of 4x or more.
Does the point of impact change when shooting with a silencer?
So far I know of only one case where the point of impact has not changed.
In most cases it changes between 2 and 10 cm.
Thicker barrels and light silencers change the point of impact less than thin barrels with heavy silencers.
Removing the silencer and putting it back on does not change the point of impact.
How does a silencer actually work?
The principle is actually simple.
The gases escaping at the muzzle are led into the silencer and go first into the expansion chamber where they can spread.
Then they are slowed down in differently designed chambers before they exit at the front, much more slowly.
How long does a silencer last?
I don’t know! A steel silencer probably lasts longer than an aluminium silencer.
I myself have fired more than 2000 rounds with an aluminium silencer.
You can see slight wear and tear from the hot gases.
But they are hardly measurable.
Does the silencer break down if you shoot too fast in a row?
Hunting sequences of shots are no problem for an (aluminium) silencer.
I have also seen a silencer in a shooting cinema, which broke because of a too fast shooting sequence.
On a military testing ground we once deliberately destroyed a silencer.
It sustained 100 shots within five minutes before it broke apart.
In the shooting cinema, when you see “continuous fire”, you will eventually see a strong flickering, which comes from the heat of the silencer.
To reduce this, there are protective covers.
Does my gun with silencer become top-heavy?
This question is asked very often.
Mostly in connection with whether the silencer is a hindrance in driven hunts.
A classic hunting rifle weighs at least 3.5 kg, plus the optics with 300-600g, which are located quite far back.
A silencer usually brings much less than 400g to the muzzle.
One says that it can “swing through” better and the other one is disturbed.
The silencer is not disturbing when sitting on the seat and if it bothers you during a driven hunt, you can shorten the barrel a little and compensate the additional weight.
Is it necessary to clean a silencer?
Do you wash your car? Yes! Do you clean your gun? Don’t say no now!
The fact is, the gun and silencer need care.
Powder residue settles inside the silencer and should be removed occasionally.
A cleaning rod or a cleaning cord are good tools.
If you can disassemble the silencer you can also clean the parts with a brush.
The gunsmith usually has an ultrasonic device to clean the silencer.
A light layer of residue, just like some oil, can even improve the damping effect.
Does the game react differently to a silenced shot?
Because the component of the muzzle blast is missing or greatly reduced, the game cannot perceive the direction the shot came from.
This often changes the direction of flight.
Especially with red deer I have observed that they even flee in the direction of the shooter.